Home › Blog › Drywall vs Sheetrock

Drywall vs Sheetrock: What Is the Difference?

Same wall, two names. What each word means, the board types used in Houston homes and why it matters when you need a repair.

Updated October 29, 2026 · Drywall Repair Houston

Quick answer: Drywall is the general name for gypsum wall panels, and Sheetrock is a brand of drywall made by USG. In a home they are the same material, they are hung and finished the same way and they are repaired the same way. When people compare drywall vs sheetrock, the only real difference is the name on the label.

Drywall vs Sheetrock: The Short Answer

All Sheetrock is drywall, but not all drywall is Sheetrock. Drywall is the material: a core of gypsum pressed between two paper faces. Sheetrock is the best known brand name for that material, made by USG, the United States Gypsum Company. It is a lot like calling every tissue a Kleenex.

So when a contractor in Houston says they will fix your sheetrock and another says they will fix your drywall, they mean the same job. The drywall vs sheetrock question only matters for the name on the panel, not for how your wall looks or how it is repaired.

DrywallSheetrock
What it isThe general name for gypsum wall and ceiling panelsA brand of gypsum panels
Who makes itMany companies, such as USG, National Gypsum, CertainTeed and Georgia PacificUSG only
MaterialGypsum core with paper facingGypsum core with paper facing
Common sizes4 by 8 and 4 by 12 foot sheets, 1/2 or 5/8 inch thickSame sizes
Used forInterior walls and ceilingsInterior walls and ceilings
How it is repairedPatch, tape, mud, texture, prime and paintExactly the same

What Is Drywall?

Drywall is a flat panel made from gypsum, a soft mineral, mixed with water and additives, then pressed between two layers of heavy paper and dried. The panels are screwed to wood or metal studs, the seams are covered with tape and joint compound, and the wall is textured, primed and painted.

It replaced plaster in most American homes after World War II because it goes up fast and costs less to install. Almost every home built in the Houston area since the 1960s has drywall walls and ceilings, from older ranch homes in Pasadena to new two story builds in Katy and Cypress.

What Is Sheetrock?

Sheetrock is a registered trademark of USG. The company has sold gypsum panels under that name for more than 100 years, and the name became so common that many people use it for any brand. Other companies make the same kind of board under their own names, such as Gold Bond from National Gypsum, ToughRock from Georgia Pacific and CertainTeed gypsum board.

In Texas and across the South, homeowners and contractors often say sheetrock instead of drywall. That is why you will see both words on contractor websites and in Google searches here. When you compare drywall vs sheetrock prices or quality between brands, the panels meet the same building standards, so the choice rarely changes the result.

Other Names You Will Hear

  • Gypsum board: the technical name used in building codes.
  • Wallboard: a general name used on older plans and at supply stores.
  • Plasterboard: the common name in the UK and other countries.
  • Rock or board: what drywall crews often call it on the job, as in hanging rock.

Whatever the name, it is the same product, so the drywall vs sheetrock question does not change the repair. If you hear any of these names when you call about a wall, the work is the same.

Types of Drywall Used in Houston Homes

The drywall vs sheetrock name matters less than the type of board. Houston heat, humidity and building codes decide which board goes where.

TypeWhere it is usedWhy it matters in Houston
Regular 1/2 inchMost interior wallsThe standard board in bedrooms, living rooms and hallways
Lightweight 1/2 inch ceiling boardCeilingsMade to resist sagging between ceiling joists
5/8 inch Type XGarage walls and ceilings next to living spaceFire rated board required by code in many garages
Moisture resistant (often green)Bathrooms, laundry rooms, kitchensHandles humid rooms better than regular board
Mold resistant (paperless or purple)Humid areas and basementsA good choice where Houston humidity and AC leaks are common
Cement boardInside showers and tub surroundsNot drywall at all, but used where tile meets water

Tip: moisture resistant drywall is not waterproof. If a roof leak, a burst pipe or an attic AC drain soaks a wall or ceiling, the wet section still needs to be cut out and replaced.

Drywall, Sheetrock or Plaster? How to Tell

A better question than drywall vs sheetrock is whether your walls are drywall at all. Many homes built before the 1950s, like some in the Heights, Montrose and historic downtown Richmond, still have plaster over wood lath.

  1. Thumbtack test: a tack pushes into drywall easily but will not go into plaster.
  2. Knock test: drywall sounds a little hollow between studs. Plaster sounds solid all the way across.
  3. Outlet check: take off a switch plate. Drywall is usually 1/2 inch thick with paper edges. Plaster is thicker and layered.
  4. Age of the home: most Houston homes built after the 1960s have drywall.

Plaster can still be patched, but the method is different, so mention it when you call about a repair.

Price, Brands and Layering

People searching drywall vs sheetrock often want to know which one is cheaper. Brand name panels and other brands sell for similar amounts at supply stores, and the difference is small for a repair. What decides the cost of a repair is the size of the damage, whether it is on a ceiling, how hard the texture is to match and how much wall needs paint.

Can you put new Sheetrock over old drywall? It is possible when a wall is badly damaged or uneven, but it adds thickness at outlets, door frames and trim. Most of the time a pro cuts out only the damaged section and patches it so it blends in.

How Sheetrock Repair Works in Houston Homes

Houston homes see the same drywall problems again and again: holes from doorknobs and TV mounts, settling cracks from clay soil and ceiling stains from roof leaks and attic AC units. Here is what a typical sheetrock repair looks like:

  1. Cut out the damage. Torn, soft or water damaged board is removed back to solid material.
  2. Add backing and a new piece. The patch is screwed to studs or backing so it stays flat.
  3. Tape and mud. Seams get tape and two or three coats of joint compound, sanded between coats.
  4. Match the texture. Orange peel, knockdown or smooth walls are matched to the rest of the room.
  5. Prime and paint. The patch is primed so it does not flash through the paint.

For a doorknob hole or a TV mount hole, drywall hole repair follows the same steps on a smaller scale. The hardest part for most homeowners is the finish, which is why texture and paint matching is often the step that makes a patch disappear.

If cracks keep coming back in the same spots, read our guide on why drywall cracks in Houston homes, since moving soil and humidity cause most of them.

Building out a new room or replacing whole walls is a different job. For garage conversions, game rooms and remodels, see drywall installation.

Need a Drywall or Sheetrock Repair?

Whatever you call it, the repair is the same. Drywall Repair Houston is a referral service for drywall repair Houston homeowners. Call (281) 670-9694, describe the damage and your zip code, and we will connect you with an independent local pro who patches, textures, primes and paints. Now you know the drywall vs sheetrock answer, so you can focus on getting the wall fixed.

Frequently Asked Questions

Is drywall the same as Sheetrock?

Yes. In the drywall vs sheetrock question, Sheetrock is simply a brand of drywall made by USG. Both are gypsum panels with paper facing, and they are installed, finished and repaired the same way.

Why do Americans call it drywall?

The name comes from how it is installed. Older walls were built with wet plaster that had to cure, while gypsum panels go up dry and only the seams get joint compound.

How do I know if I have drywall or plaster?

Press a thumbtack into the wall. It goes into drywall easily but not into plaster. Plaster walls also feel harder, sound solid when tapped and are common in homes built before the 1950s.

Which is cheaper, Sheetrock or drywall?

The Sheetrock brand and other drywall brands are priced close to each other. For a repair, the brand barely matters. The size of the damage, ceilings, texture and paint decide the cost.

Can you put Sheetrock over existing drywall?

It can be done to cover a badly damaged or uneven wall, but most repairs only replace the damaged section. Wet, moldy or swollen drywall should always be removed first.

What drywall is best for bathrooms in Houston?

Moisture and mold resistant board works well on bathroom and laundry walls in humid Houston homes. Inside a shower or tub surround, use cement board, not drywall.

Talk to a Local Drywall Pro

Call Drywall Repair Houston and we will connect you with an independent local pro for your repair.

Similar Posts